List of Communications Errors
From DLS5 Wiki
Revision as of 16:30, 20 July 2009 by Andthompson (Talk | contribs)
From time to time you may experience errors when trying to communicate to a panel using DLS IV. The following is a list of common errors and their causes and solutions.
PSTN Specific Errors
- PSTN: Connection Broken Before Completion: This error is caused by the panel or modem being disconnected from the phone line while DLS IV is in the process of communicating. Make sure all connections are secure.
- PSTN: Dialing [phone number] on modem 1 received busy signal: You will see this error if the modem successfully dialed the phone number but received a busy signal. Ensure that the phone line the panel is connected to is not in use.
- PSTN: Disconnected from 102:
- PSTN: No dial tone detected on modem 1:
- PSTN: The modem 0 is not responding:
- PSTN: The panel did not answer phone number 55:
- There are no modems available:
- Timeout while waiting for panel to call back:
- Your telephone number contains invalid characters. Valid characters are 0-9,#,*,W and comma.:
