Firewall Friendly Connection Setup: PC Firewall Setup Instructions: Difference between revisions

From DLS5 Wiki
Jump to navigation Jump to search
← Older editNewer edit →
Curtis.jay (talk | contribs)
Contributor
0 edits
Curtis.jay (talk | contribs)
Contributor
0 edits
No edit summary
Line 6: Line 6:
Firewall Friendly is a new connection type that works with PowerSeries Pro control panels. This connection type was designed to allow you to easily connect over IP to panels in the field, without the need to forward ports or make other changes to the firewall setup at the site where the panel is installed. This is especially beneficial for panels installed at sites that do not have a static IP from their Internet Service Provider, since our Firewall Friendly server will act as a DNS lookup server for the site.
Firewall Friendly is a new connection type that works with PowerSeries Pro control panels. This connection type was designed to allow you to easily connect over IP to panels in the field, without the need to forward ports or make other changes to the firewall setup at the site where the panel is installed. This is especially beneficial for panels installed at sites that do not have a static IP from their Internet Service Provider, since our Firewall Friendly server will act as a DNS lookup server for the site.


=== Firewall Friendly Setup Instructions ===
The Firewall Friendly programming can be done for any of the four Integration Sessions of the communicator. For Session 1, follow the section numbers below. For Session 2-4, please consult the PowerSeries Pro Installation Manual for the appropriate section numbers.


==Panel Programming:==
Enter Section [851] and then enter sub-sections below:
1. [424] [11111111*]
2. [425] [enable toggle options 3 and 5]
3. [426] [enable toggle options 3 and 5]
4. [427] [00010]
5. [428] [18.195.144.225]
6. [429] [01303]
7. [430] [03073]
8. [432] [03070]
9. [433] [03071]


==PC Firewall setup:==
==PC Firewall setup:==

Revision as of 20:31, 11 December 2018


Firewall Friendly Connection Type

Firewall Friendly is a new connection type that works with PowerSeries Pro control panels. This connection type was designed to allow you to easily connect over IP to panels in the field, without the need to forward ports or make other changes to the firewall setup at the site where the panel is installed. This is especially beneficial for panels installed at sites that do not have a static IP from their Internet Service Provider, since our Firewall Friendly server will act as a DNS lookup server for the site.


PC Firewall setup:

Note: This setup will only be required the first time Firewall Friendly is used on the Server or Workstation.


Control Panel\System and Security\Windows Defender Firewall: Click “Advanced Settings”


Inbound Rules > New Rules
Select Port and Click Next
Make sure TCP is selected and Program “Specific Local ports” as 51004 and Click Next
Make sure Allow the connection is selected and click Next
Make sure all the check boxes are selected and Click Next
Give the new Inbound Rule a name and click Finish
Retrieved from "https://dlshelp.dsc.com/index.php?title=Firewall_Friendly_Connection_Setup:_PC_Firewall_Setup_Instructions&oldid=2788"