|
|
| Line 1: |
Line 1: |
| | + | #Redirect [[T-Link Module#Port Forwarding]] |
| | + | |
| | [[category:communications]][[category:Troubleshooting]] | | [[category:communications]][[category:Troubleshooting]] |
| − |
| |
| − |
| |
| − | When using SMS connection type, SMS is used to trigger the communicator module to launch a connection to the DLS IV computer. To accept these SMS initiated incoming connections to DLS IV, the local network (DLS IV's local network) must be setup accordingly.
| |
| − | A port must be opened for TCP traffic to be passed through to the DLS IV computer.
| |
| − |
| |
| − |
| |
| − | First, set your PC's network configuration to have a STATIC IP. The port forwarding required by DLS IV will not work well with DHCP (dynamic IP).
| |
| − |
| |
| − |
| |
| − | Next, choose a port to be opened on your router/firewall. We recommend using a higher port number, 30000 or higher, to reduce the chance of conflicting with another application. This port is your PUBLIC PORT.
| |
| − | DLS IV is configured to be listening on port 51004 of the PC at ALL times. This will be your PRIVATE PORT.
| |
| − |
| |
| − |
| |
| − | Now, the router/firewall can be configured.
| |
| − |
| |
| − | IP = your static IP
| |
| − |
| |
| − | PUBLIC Port = the port you chose
| |
| − |
| |
| − | PRIVATE Port = 51004
| |
| − |
| |
| − | Protocol = TCP
| |
| − |
| |
| − |
| |
| − | The last step, if necessary, is to open Port 51004 on the PC’s firewall.
| |
| − |
| |
| − |
| |
| − | That’s it. You should be ready to use the SMS connection type to remotely program your unit.
| |
| − |
| |
| − |
| |
| − | It’s important to note that Connect24 will need to know the PUBLIC PORT. When creating an account, be sure to include your PUBLIC IP and the PUBLIC PORT.
| |
