T-Link Module

What is a T-Link Module?

The T-Link module is DSC's IP connectivity solution for alarm panels. The T-Link comes in many different configurations depending on which control panel you wish to us it on, and what you plan on using it for. Among other functions, the T-link is the fastest and most convenient way to connect to your control panels using DLS IV.

What do I need to connect using DLS IV?

Port

Port Forwarding

When using the SMS connection type, an SMS message is used to trigger the communicator module to launch a connection to the DLS IV computer. To accept these incoming connections to DLS IV, the local network (DLS IV's local network) must be setup accordingly: a port must be opened for TCP traffic to be passed through to the DLS IV computer.

First, set your PC's network configuration to have a STATIC IP. The port forwarding required by DLS IV will not work well with DHCP (dynamic IP).

Next, choose a port to be opened on your router/firewall. We recommend using port number 30000 or higher, to reduce the chance of conflicting with another application. This port is your Public Port. DLS IV is configured to be listening on port 51004 of the PC at ALL times. This will be your Private Port.

The next step is to go in to your router or firewall connections and set it up to forward the correct ports. For more help on this, there are some excellent resources online such as PortForward.com

The router/firewall can be configured accordingly:

IP = your static IP

PUBLIC Port = the port you chose

PRIVATE Port = 51004

Protocol = TCP

The last step, if necessary, is to open Port 51004 on the PC’s firewall. It’s important to note that Connect24 will need to know the Public Port. When creating an account, be sure to include your Public IP and the Public Port.